Whirlwind EDB1

Cajas Directas. Caja directa pasiva, convierte se?al desbalanceada 1/4 en balanceada XLR, con atenuador de -40dB, -20 db Pad y 0dB .
Descripción

Caja directa pasiva, convierte señal desbalanceada 1/4 en balanceada XLR, con atenuador de -40dB, -20 db Pad y 0dB .

IN: For input of the signal from the source. The source may be the output of any type of musical
instrument or amplifier speaker output. (WARNING! In speaker mode, the EDB-1 does not supply the proper
amplifier load required by most tube type amplifiers. Do not use a tube amplifier s speaker output alone with the EDB-1.
You must also have a speaker or appropriate dummy load connected to avoid possible damage to the amplifier.
OUT A "Y" connection or "loop through" from the input.
OUTPUT: A male XLR, provides a balanced low impedance (150 Ohms) signal for connection to
balanced, low-Z equipment (mixing console, workstation, etc.)
PAD: Most instruments will operate properly when set to the "0" position. Set to the "-20dB"
position for use with very "hot" instrument signals. Set to "-40" or when connecting to the
speaker output of an amplifier.
GND/LIFT: Disconnects the ground between the input and the XLR output when set to the LIFT
position to help eliminate hum. Ground remains connected when set to the GND position.