Avalon Design M5

Preamplificador. Preamplificador, Clase A.
Descripción

El preamplificador de micófono Avalon M5 está diseñado para optimizar la señal de audio, combina un transformador de entrada de alta gama, con un circuito completamente analógico, con un diseño de preamplificador clase A, con el cual nos brinda excelente calidad de audio. El M5 es ideal para voces e instrumentos acústicos, adicionalmente cuenta con una entrada DI para una grabación directa de bajos eléctricos, guitarras eléctricas y teclados. Todo esto en una carcasa robusta para dar una gran durabilidad.

Características Técnicas

Circuit Topology: Twin cascode FET and bipolar low level input signal stages. High-voltage, 100% discrete, symmetrical high-bias Pure Class A amplifiers.
Input Type and Load: Superior transformer, balanced low-ratio 1500 ohm input load.
Maximum Mic Level: +36dB balanced XLR pin 2 hot (with -20dB passive attenuator).
Maximum Instrument Level: +30dB balanced 600 ohms, DC coupled, discrete Class A.
Input Attenuator: -20dB resistive pre transformer primary, sealed silver relay.
Phantom Power: +48v regulated 50mA capability, sealed silver relay.
High Pass Filter: Passive, variable from 30Hz to 185Hz @ 6dB per octave, sealed silver relay.
Polarity Reverse: Sealed silver relay on microphone input.
Gain Range Input : +20dB to +64dB in 2dB steps.
Maximum Output Level: +30dB unbalanced 600 ohms, DC coupled, discrete symmetrical Pure Class A.
Output Type: XLR connector, pin 2 hot (optional balanced JT-1 transformer).
Noise EIN Unweighted: -126dB 150 ohm.
Noise 20kHz Unweighted:-100dB
Distortion THD, IMD: 0.05% nominal
Frequency Response -3dB: 1Hz to 120kHz transformer limit.
System Bandwidth: DC to 1MHz
Output Meter: High quality, illuminated analog VU meter 0dB = +4dB.
Peak Meter: Bi-color LED""s 0dB and +20dB peak detection circuit.
M5 Dimensions: 8.5 x 3.5 x 12 in (216 x 88 x 305mm) half rack width.
Weight: 15lbs (6.8kg)
Dimensions of Shipping Carton: 24 x 21.5 x 7.5 in (610 x 546 x 190mm)
Weight-Packed: 25lbs (11.4kg) includes B2T power supply and cables.
AC power supply B2T: External toroidal 100V to 240V, 50-60Hz selectable, 150 watts maximum.
Cables: 1 x 8ft 4 pin ac cable, 1 x 8ft standard IEC cable included.
Dimensions: 5 x 7 x 3.25 in (127 x 177 x 83mm)
Weight: 7lbs (3.2kg)
Rack mount kit (1) RM-1: Single M5 19 inch rack mount kit (holds one half rack unit).
Rack mount kit (2) RM-2: Dual M5 19 inch rack mount kit (holds two half rack units).
20160127_1453922013_387949
20160127_1453922024_898047
20160127_1453922026_906003